 |
Follow us on:
|
 |
FREQUENCY CONVERTER - AC POWER SUPPLY
|
PF1350
World Wide AC Power Supply / Frequency Converter / Inverter on your bench or test
rack
|
 |
Behlman's PF1350 AC Power
Supply / Frequency Converter / Inverter, delivers 1350VA of
clean, regulated AC power in a 3.5" high bench top unit,
that easily converts to rack mount, for far less cost than competitive
models.
The PF1350 can simulate any world wide utility as well
as aircraft and shipboard power. Simply select the required frequency,
choose a voltage range, dial up your desired voltage, and you
are ready to test.
The PF1350 delivers all the quality features you have
come to expect from Behlman; clean sinewave output with
excellent line and load regulation, high efficiency and low
harmonic distortion, in the industries most compact size.
|
| Specifications |
Power: |
95-270 VAC, @ 16Amps Max. (Full power from 115VAC to 270 VAC)
|
| |
Input |
Voltage: |
120,
+/-10% |
Frequency:: |
47-63 Hz. 47-440Hz (Non CE Mark) |
| |
Output |
Voltage: |
Dual Range; 0
- 135 & 0 -270VAC, full isolation from input. |
Frequency: |
50Hz, 60Hz or
400Hz |
Crest Factor: |
3:1 |
Power Factor: |
100% of rated
output into any power factor load. |
Distortion: |
1% TypicalTHD
(measured at full load, 115VAC, 60hZ. |
AC Regulation: |
0.7% @ F.S., No Load to Full load,
resistive |
Line Regulation: |
+/-0.1% for +/-10%
line change |
AC Regulation
Response time: |
250 – 300 msec.
typical |
Protective Circuits |
Input Protection: |
Fuse. |
Constant
Current: |
Overload
automatically causes voltage fold-back to provide maximum
current without distorting output waveform |
Short Circuit
Protection: |
Short
circuit overload electronically latches output open to protect
load... power restored by recycling input power. |
Thermal Protection: |
Internal temperature
sensor prevents heat damage. |
Front Panel Display |
-
Power on/off
switch
-
Frequency Select
Switch
-
Range switch
|
-
Volts potentiometer
-
Meter for Volts
readout
-
Fault indicator
|
Mechanical Specifications |
Chassis: |
High strength bench
top chassis |
Dimensions: |
3.5”H
x 17”W x 22”D |
| Weight: |
39lbs |
Operating Temperature: |
0 Deg C to +55 Deg
C |
Input Connector: |
IEC320
C-20 receptacle with six foot line cord with NEMA 5-15 plug |
Output Connection: |
European "Schuko"
receptacle with NEMA 5-15 adapter. (1) |
Supplied with North American line cord with NEMA 5-15 Plug.
(1) Other Adapters Available |
Options |
| L: |
Locking
pot |
RM: |
Rack Mounting Kit |
RO: |
Rear Output NEMA
5-15 receptacle |
| TB: |
Rear
output enclosed terminal block |
| A001:
|
Adapter, “SCHUKO”
to NEMA 5-15R |
| A002:
|
Adapter, “SCHUKO”
to NEMA 6-15R |
| A003:
|
Adapter, “SCHUKO”
to UK1-13R |
| A004: |
Adapter, “SCHUKO”
to Swiss SW1-10R |
| A005: |
Adapter, “SCHUKO”
to Italian IT1-10R/16R |
| A006: |
Adapter, “SCHUKO”
to Australian AU1-10R |
|
 |
 |
